<

Adventure Time’s Jake the Dog Character Hat Crochet Pattern

Adventure Time’s Jake the Dog Character Hat Crochet Pattern
907 Flares Twitter 0 Facebook 41 Pin It Share 864 Google+ 1 Reddit 0 Buffer 1 Email -- Filament.io 907 Flares ×

Adventure Time’s Jake the Dog Character Hat Crochet Pattern

free crochet pattern from cRAfterChick.com

Adventure Time's Jake the Dog Character Hat Crochet Pattern (2)

This character hat is my crochet interpretation of the character Jake the orange dog from the popular cartoon series Adventure Time. My nephew is a really big fan so I decided to make a crocheted Jake character hat for him.  I have to admit I had never crocheted a curved tube before and it almost drove me nuts before I figured it out but once I did it was pretty smooth sailing.  My only annoyance was that and then trying to sew the snout wrinkle tube on to the hat. I may have overstuffed it just a wee bit.  The is definitely advanced beginner and up.  If you make Amigurumi stuffed animals you will probably find it a lot easier than I did.

Have you not heard of Jake or Adventure Time yet?  I guess that’s possible. ;)  If you haven’t and want to learn more, please check out information here.

Adventure Time's Jake the Dog Character Hat Crochet Pattern

Here is a picture to show both my Jake the Dog and Finn character hats together.

<3 Adventure Time <3

If you have any questions, please let me know. Happy crafting!

Adventure Time's Finn  and Jake Character Hats Crochet Pattern

Adventure Time’s Jake the Dog Character Hat Crochet Pattern Notes

Project requires:
Golden yellow yarn for beanie color and snout pieces
Black Yarn for face features
White yarn for eye color
“J” hook (6.0 mm)
Scissors or Yarn Cutter
Blunt large eye yarn / tapestry needle to weave in ends
small amount of fiberfill stuffing for snout wrinkle piece

Abbreviations used in this pattern:
ch – chain
st – stitch
sl st – slip stitch
sc – single crochet (US)
dc – double crochet  (US)
hdc – half double crochet  (US)

Adventure Time's Jake the Dog Character Hat Crochet Pattern (3)

Pattern Instructions:
*Note: This project is worked in the round on the base of a magic ring. If you do not know how to do this, please see tutorial here from: yarntomato on CrochetMe

The hat in this picture is made with my free Easy Peasy Youth Sized (Age 3-10 years old) Double Crochet Beanie  Hat Pattern which you can find  here as a foundation for the project. Want it in another size? No worries. Head over to Easy Peasy All Family Sizes Free Double Crochet Beanie Patterns to select the size of the free pattern you want for your project.

Hat Base: in main golden yellow yarn 
Use Easy Peasy Crochet Beanie Size of your choice

Once you have completed your beanie base you are ready to start making it into Adventure Time’s Jake the dog. :)

Ear Front (Make 2): using main color yarn
Row 1: Ch 5. Place 2 dc in 3rd ch from hook, 1 dc in next ch and 2 dc in last ch. Ch 2 and turn. (5 dc)
Row 2: Make 2 dc in 1st st in row and place 1 dc in each of the following 4 st. Ch 2 and turn. (6 dc)
Row 3: Place 1 dc in each st across. Ch 2 and turn. (6 dc)
Row 4: Place 1 dc in each st across. Ch 1 and turn. (6 dc)
Row 5: Place 1 sc in each st across. Ch 1 and turn.  (6 sc)
Fasten off.
Repeat for second ear front.

This feature will work on toddler, youth, pre-teen, teen, womens and men sized hats very well. For smaller sizes do following instead:
Row 1: Ch 3. Place 3 hdc in 3rd ch from hook. Ch 2 and turn. (3 hdc)
Row 2: Make 2 hdc in 1st st in row and place 1 hdc in each of the following 2 st. Ch 2 and turn. (4 hdc)
Row 3: Place 1 hdc in each st across. Ch 2 and turn. (4 hdc)
Row 4: Place 1 hdc in each st across. Ch 1 and turn. (4 hdc)
Row 5: Place 1 sc in each st across. Ch 1 and turn.  (4 sc)
Fasten off.
Repeat for second ear front.

Ear Back and Assembly(Make 2): using main color yarn
Repeat Rows 1-5 from Ear Fronts in previous step but do not fasten off.
Row 6: Ch 1 and turn placing an ear front in front of the ear back you are working on, lining up the stitches together. Work 1 sc in each st around through both pieces at same time to attach them together. In bottom most 5 st from Row 1, place 2 sc, before resuming 1 sc in each until you have reached back to 1st st worked in row. Sl st to top of the 1st st in row.
Leave an extra long tail to attach to hat, cut yarn, pull through yarn and put to side until needed in assembly. Repeat for second ear.

Upper snout wrinkle piece: using main color yarn

You want to add the fiberfill stuffing as you work on the wrinkle so you don’t have to stuff it down when at end of your curve. :) 
Round 1: In magic circle, ch 1 before placing 8 sc in circle. Pull circle closed. Sl st in top of 1st st in round. (8 sc)
Round 2: Ch 2 before placing 2 sc in 1st st and each of the following 7 st around. Sl st in to the top of the 1st st in round. (16 sc)
Round 3- 8: Ch 1 before placing 1 sc in 1st st and each of the following 15 st around. Sl st in top of 1st st in round. (16 sc)
Round 9- 22: Ch 1 before placing 1 sc in 1st 4 st, 1 hdc in next 4 st, 1 sc in next 4 st and sl st in each of the last 4 st. Sl st in to the top of 1st st in round. (this will give you the curve you want for his upper snout wrinkle piece)
Round 23-29: Ch 1 before placing 1 sc in 1st st and each of the following 15 st around. Sl st in top of 1st st in round. (16 sc)
Round 30: Ch 1 before sctog 1st two st together and repeat sctog st in pairs to end of round. Sl st in top of 1st st in round. (8 sctog)
Fasten off. You will be using the extra long tail on the nose backing piece to sew this item on to your hat in assembly.

This feature will work on toddler, youth, pre-teen, teen, womens and men sized hats very well. For smaller sizes do following instead:
Round 1: In magic circle, ch 1 before placing 4 sc in circle. Pull circle closed. Sl st in top of 1st st in round. (6 sc)
Round 2: Ch 2 before placing 2 sc in 1st st and each of the following 3 st around. Sl st in to the top of the 1st st in round. (12 sc)
Round 3- 6: Ch 1 before placing 1 sc in 1st st and each of the following 11 st around. Sl st in top of 1st st in round. (12 sc)
Round 7- 17: Ch 1 before placing 1 sc in 1st 3 st, 1 hdc in next 3 st, 1 sc in next 3 st and sl st in each of the last 3 st. Sl st in to the top of 1st st in round. (this will give you the curve you want for his upper snout wrinkle piece)
Round 18-21: Ch 1 before placing 1 sc in 1st st and each of the following 11 st around. Sl st in top of 1st st in round. (12 sc)
Round 22: Ch 1 before sctog 1st two st together and repeat sctog st in pairs to end of round. Sl st in top of 1st st in round. (6 sctog)
Fasten off. You will be using the extra long tail on the nose backing piece to sew this item on to your hat in assembly.

Nose Base and Lip Line: using main color yarn (this will also serve as the anchor for your upper snout wrinkle) and black yarn for the lip line of row 5.
Row 1: Ch 5. Make 2 dc in 3rd ch from hook, 1 dc in following ch and 2 dc in remaining ch. Ch 2 and turn. (5 dc)
Row 2:  Place 2 dc in 1st st and 1 dc in each of the following 4 st across. Ch 2 and turn.  (6 dc)
Row 3-4: Make 1 dc in each st across. Ch 2 and turn. (6 dc)
Row 5: Make 1 dc in each st across. (6 dc) Ch 1 but do not turn. Continue to work 1 sc down the perimeter from your worked row so far counter clockwise, placing 1 sc in each st but 2 sc in bottom most 3 st of curve to give more rounded appearance. Continue around until you have reach back at beginning of round. Sl st in to the top of the 1st st in row.
Leave an extra long tail to attach to hat, cut yarn, pull through yarn and put to side until needed in assembly. You will be using this tail to attach your nose back piece on to the top snout wrinkle piece and then secure your assembled snout on to your beanie hat so make sure you have plenty of length to do so.
Row 6: Attach black with sl st to where you left off. Ch 1 before working 2 sc in 1st st of Row 5, 1 sc in next 4 st and 2 sc in last st on this side. Sl st back in to last st sp. (8 sc)
Fasten off.
You should still have extra long golden yellow tail, do not fasten this off as you will need it during assembly.

This feature will work on toddler, youth, pre-teen, teen, womens and men sized hats very well. For smaller sizes, newborn to 12 month sized hats, make this pieces in hdc instead of hdc.  

Eye whites (Make 2): using white yarn
Round 1: In a magic circle, ch 2 before placing 12 dc in circle. Pull circle closed and sl st in the top of the 1st st in round. (12 dc)
Round 2: Ch 1 before placing 2 sc in 1st st and each of the following 11 st around. Sl st in the top of the 1st st in round. (24 sc)
Leave a tail long enough to attach to eye color backs before cutting yarn, pulling yarn through and put to side until needed in assembly.
Repeat for second eye.

This feature will work on toddler, youth, pre-teen, teen, womens and men sized hats very well. For smaller sizes do following instead:
Round 1: In a magic circle, ch 2 before placing 10 hdc in circle. Pull circle closed and sl st in the top of the 1st st in round. (10 hdc)
Round 2: Ch 1 before placing 2 sc in 1st st and each of the following 9 st around. Sl st in the top of the 1st st in round. (20 sc)
Leave a tail long enough to attach to eye color backs before cutting yarn, pulling yarn through and put to side until needed in assembly.
Repeat for second eye.

Outer eye color backs (Make 2): using black yarn
Round 1: In a magic circle, ch 2 before placing 12 hdc in circle. Pull circle closed and sl st in the top of the 1st st in round. (12 dc)
Round 2: Ch 2 before placing 2 dc in 1st st and each of the following 11 st around. Sl st in the top of the 1st st in round. (24 dc)
Leave a yarn tail to attach to hat before cutting yarn and pulling yarn through. Put to side until needed.
Repeat for second eye.

This feature will work on toddler, youth, pre-teen, teen, womens and men sized hats very well. For smaller sizes make do following steps instead of above:
Round 1: In a magic circle, ch 2 before placing 10 hdc in circle. Pull circle closed and sl st in the top of the 1st st in round. (10 hdc)
Round 2: Ch 2 before placing 2 hdc in 1st st and each of the following 9 st around. Sl st in the top of the 1st st in round. (20 hdc)
Leave a yarn tail to attach to hat before cutting yarn and pulling yarn through. Put to side until needed.
Repeat for second eye.

Nose: using black yarn
Round 1: Ch 1 before placing following in circle: 2 sc, 1 hdc, 1 dc, 1 hdc, 3 sc, 1 hdc, 1 dc, 1 hdc, 1 sc. Pull your ovalish circle closed. Sl st in to the top of 1st st in round. (12 st total)
Round 2: Ch 1 before placing 1 sc in 1st 2 st, 2 sc in next 3 st, 1 sc in next 3 st, 2 sc in next 3 st and 1 sc in last st. Sl st in to the top of the 1st st in round.
Leave a long enough of a yarn tail to attach to hat before cutting yarn and pulling yarn through. Put to side until needed.

This feature will work on toddler, youth, pre-teen, teen, womens and men sized hats very well. For smaller sizes do following instead:
Round 1: Ch 1 before placing following in circle: 1 sc, 3 hdc, 2 sc, 3 hdc, 1 sc. Pull your ovalish circle closed. Sl st in to the top of 1st st in round. (10 st total)
Leave a long enough of a yarn tail to attach to hat before cutting yarn and pulling yarn through. Put to side until needed.

Finishing off:
Starting with your snout / mouth pieces, take the tail left on Jake’s black nose and use your Blunt large eye yarn / tapestry needle to sew it in desired place on front of the assembled snout wrinkle curved tube.  I made mine so the bottom was hanging a little bit off the tube to look more like the character but feel free to secure the whole thing if you desire.  Once secured in place, pull yarn to back of snout wrinkle piece and fasten off.
Now taking the main color golden yellow yarn tail left on your nose base, stitch it in place on to the back of your nose wrinkle piece.  This will support your nose tube, give you an anchor to attach it to hat in next step and provide the mouth / lip line as seen in pictures.  Once secure do not fasten off.  Keep remaining tail and Blunt large eye yarn / tapestry needle to move on to next step.
Taking the remaining tail from above step and needle, sew your assembled nose/snout/mouth area for Jake on to the beanie hat.  I put mine near the bottom lining up the tube to just above the last round on hat but you can move it up higher or even lower to have hanging piece in front.  It’s your call.  Once it is sewn completely in place, pull your yarn in to the inside of the beanie hat before fastening off.
Next take the tail from one eye white and your Blunt large eye yarn / tapestry needle to sew it on top of one eye color back (black).  I did mine slightly down and to the inside instead of centering it on the black piece so it looked more like the character in images. You can see image near top of blog or reference my pictures to see how I placed my own.  Once secure, pull yarn to back of the eye color back before fastening off. Repeat process for second eye white.
Now taking the black yarn tail left on one assembled eye, use your  Blunt large eye yarn / tapestry needle to sew it in place directly on to your Jake beanie hat. I placed mine on each side near the top of the snout piece but you can play around with it and your spacing on your hat. Check out my pictures to see where I placed mine.   Once his eye is attached, pull yarn to inside of beanie and fasten off. Repeat process for second assembled eye.
Next take the tail from one assembled ear and your needle to attach the ear on side of beanie hat.  To be more like the illustrations of Jake the dog, I placed mine just above half way down my hat.  You can see my placement in pictures but feel free to play around with your placement.  I often use safety pins to see how it will look before I attach them.  Once you have stitched on the ear, pull yarn to inside and fasten off. Repeat process for the second ear.
Now just double check your work for any loose ends or extra yarn tails you may have missed during hat assembly. If you find any, go ahead and fasten them off now.
All done. :)  Your Adventure Time Jake the dog character hat is ready to wear or give to a fellow fan. <3  As always if you have any questions, please don’t hesitate to ask. Happy crafting!

Here are more of the pictures I took to show how the completed Jake hat looks when worn:

Adventure Time's Jake the Dog Character Hat Crochet Pattern (4)

Adventure Time's Jake the Dog Character Hat Crochet Pattern (5)

Adventure Time's Jake the Dog Character Hat Crochet Pattern (7)

Adventure Time's Jake the Dog Character Hat Crochet Pattern (6)

Note: All the cRAfterChick patterns shared on this site are free of charge.  Please feel free to use them to make your own items.  If you use it to make items to sell please credit cRAfterChick for the pattern and provide link to our site.  Please do not copy and paste my pattern or try to use my images as your own.  You can link to any of my patterns.  Happy crafting!

Want more free patterns? Follow cRAfterChick on Facebook or Pinterest to get updates on patterns as they are added.

907 Flares Twitter 0 Facebook 41 Pin It Share 864 Google+ 1 Reddit 0 Buffer 1 Email -- Filament.io 907 Flares ×

7 Comments

  1. [...] I turn and since my nephew is a giant fan as well as myself, I decided to make Finn plus a Jake hat for him to wear.  I posted it on my personal Facebook account when I finished it a few days [...]

  2. Linda
    Linda August 9, 2013 at 3:17 am .

    on the upper snout and wrinkle do you make 2 of thes and sew them together?

  3. Janna Stacey
    Janna Stacey September 13, 2013 at 3:52 pm .

    Thank you for creating the Adventure time hats. I have a granddaughter 5 and a grandson 3 and they love adventure time. I have created a baby cocoon in the body of Jake and the hat will be a nice addition. I also love the fact that you included links to make the hat in adult sizes as well.

    I am going to use your beanie pattern to make a Marcelene hat for my granddaughter.

  4. Judy Hartzell
    Judy Hartzell December 25, 2013 at 1:22 am .

    Thanks so much for the pattern, my 12 year old Granddaughter just asked me to make her one of Jake……….so here I am! Love it!

  5. Kathy Szczytko
    Kathy Szczytko January 19, 2014 at 8:00 pm .

    I just finished my third Jake the dog hat. My son and his 8 year old son are Adventure Time fans. This one I’m making for a request for my niece who has a cool English Bulldog. This third hat is done with single crochet once the increases stopped to make a stronger base to hold the pieces sewn on. Also single crocheted the ear pieces to the called size. They look much better. Thank you for the pattern to follow. I will try Finn next.

  6. [...] For more information and free pattern instructions, see:  http://crafterchick.com/adventure-times-jake-the-dog-character-hat-crochet-pattern/ [...]

Add a comment

*
*
*

907 Flares Twitter 0 Facebook 41 Pin It Share 864 Google+ 1 Reddit 0 Buffer 1 Email -- Filament.io 907 Flares ×